Auxiliaries for adhesion of paints and inks

English name: CoatingAdditives

Scope of application: It can be used in the formulation of coatings, inks and adhesives to greatly improve the wettability

1，FS-1100

FS-1100 is a highly effective non-ionic fluorine surfactant, with strong ability to reduce surface tension, excellent chemical stability and high temperature resistance. It can be used in coatings, oil fields, detergents, electronics, plastic processing and other fields.

Technical indicators

Ion type: Non ionic

Appearance: yellow or brown liquid

Active ingredient content (%): 100

Density (25 ℃, g/cm3): 1.38

Surface tension (25 ℃ deionized water, dyne/cm): ＜ 22 (0.01%), ＜ 18 (0.1%)

Foaming property: strong foaming property

Solubility: ＞ 2% (methanol, isopropanol, ethyl acetate, toluene, tetrahydrofuran, chloroform, etc.), slightly soluble in water (＞ 0.1%), insoluble in n-hexane

Functions and applications

The surface tension of aqueous solution can be greatly reduced when it is used in oil field drainage aids; Used in the coating field, it can be used as a wetting leveling agent to improve the wettability of the substrate and reduce shrinkage; It is used in the electronic industry as an important additive in flux, velvet making on polysilicon surface of solar cells and electrolyte of lithium batteries; In the field of plastic processing, it can inhibit the migration of plasticizer, and can be used as coupling agent of PTFE filler, plastic antifouling agent, etc; In the field of cleaner, it is mainly used for the surface cleaning of circuit boards, metal surfaces, glass products, fabrics, plastics and various low surface energy materials.

packing

25kg/barrel or 50kg/barrel.

matters needing attention

Due to the poor dispersibility of the product in the aqueous system, it is recommended to dilute it with solvent (ethylene glycol butyl ether) before use.

2，FS-1200

FS-1200 is a highly effective non-ionic fluoride surfactant with strong ability to reduce surface tension. It can be used in coatings, oil fields, detergents, electronics, plastic processing and other fields.

Technical indicators

Ion type: Non ionic

Appearance: yellowish yellow wax (heated to 40 ℃ to melt into liquid)

Density (25 ℃, g/cm3): 1.35

PH value (0.1% aqueous solution): 6-8

Active ingredient content (%): 100

Surface tension (0.01% aqueous solution at 25 ℃, dyne/cm):<23

Solubility: water and polar organic solvent

Functions and applications

The product is applied in the ink field, which can be compatible with the pigment particles earned by the ink, and can improve the printing effect; Its application in the paint field can improve the wetting, anti fogging and UV resistance, and is compatible with most water-based/solvent based formulations; In the polymer field, it can improve the anti pollution, anti fog, anti ultraviolet and internal lubrication of the polymer; In the adhesive field, it can enhance the wettability and be compatible with most water-based/solvent based formulations; It can be used in metal and electronic fields to improve the etching effect, and can be used as electroplating agent and zinc battery oxidation inhibitor.

packing

25kg/barrel or 50kg/barrel.

matters needing attention

Due to the poor dispersibility of the product in the aqueous system, it is recommended to dilute it with solvent (ethylene glycol butyl ether) before use.

Store in a cool, dry place.

3，FS-1330

FS-1330 is an anionic fluorine surfactant with strong ability to reduce surface tension, excellent chemical stability and thermal stability. It can be used in paint and ink, polymer emulsion, plastic/rubber processing, detergent and other fields.

Technical indicators

Ion type: anion

Appearance: yellow brown liquid

Density (25 ℃, g/cm3): 1.0

Active ingredient content (%): 30

Solvent (%): water (45)/isopropanol (25)

Surface tension (25 ℃, 0.1% aqueous solution, dyne/cm): 22-25

Foaming property: low foaming property

Solubility: mixed solvent of water (33%) and isopropanol (67%), methanol, etc

Functions and applications

In the field of paint and ink application, as a wetting agent, the anti fouling performance of the coating can be improved; It can be used in plastic/rubber processing field as release agent; The addition of this product in emulsion polymerization can also improve the comprehensive performance of the emulsion, especially the stain resistance; In the field of cleaning, the use of this product can significantly improve the cleaning effect. After washing, it can also improve the oil resistance, water resistance and dirt resistance of the cleaned surface.

Dosage: 0.05-0.5%.

packing

25kg/barrel or 50kg/barrel.

matters needing attention

The product is difficult to disperse in aqueous system, so it is better to dilute it before use.

The product may be layered after long-term storage. Please mix well before use.

4，FS-6170

FS-6170 is a fluorocarbon modified polyacrylate leveling agent, which does not contain organic silicon, has no interlayer adhesion problem, and has lower surface tension. When applied to the coating formulation, it can improve the leveling property, increase the wettability of the substrate, prevent the coating shrinkage, help the coating degassing and defoaming, and do not affect the repainting property

Product description:

FS-6170 is a fluorocarbon modified polyacrylate leveling agent, which does not contain organic silicon, has no interlayer adhesion problem, and has lower surface tension. When applied to the coating formulation, it can improve the leveling property, increase the wettability of the substrate, prevent the coating shrinkage, help the coating degassing and defoaming, and do not affect the recoating property.

Technical indicators

Appearance: clear to slightly turbid liquid

Active ingredient content (%): 70

Solvent (%): 30

Boiling point (℃/760mmHg, 1.01bar): 120

Flash point (℃): 28

Density (25 ℃): 0.98g/cm3

Solubility: Compatible with most alcohols, lipids, ketones and hydrocarbon solvents

Functions and applications

This product can be used in all solvent based coatings, especially in the following fields: leveling agent and anti shrinkage agent for all solvent based baking paints; Leveling agent, anti shrinkage agent and foam inhibitor of polyurethane coating; Leveling and anti shrinkage agent of epoxy resin coating. It can improve the leveling property, increase the wettability of the substrate, prevent the coating shrinkage, help the coating degassing and defoaming, and do not affect the recoating property.

The recommended dosage is 0.5-2%.

packing

25kg/barrel or 50kg/barrel.

matters needing attention

Store in a cool, dry place.

5，FS-6210

FS-6210 is an economical fluorine-containing wetting leveling agent specially developed for coatings, inks and adhesives, which can be applied to water-based and solvent based systems. This product does not contain APEO.

Product description:

FS-6210 is an economical fluorine-containing wetting leveling agent specially developed for coatings, inks and adhesives, which can be applied to water-based and solvent based systems. This product does not contain APEO.

Technical indicators

Product type: perfluoroalkyl polyoxyethylene ether

Appearance: amber transparent liquid

Density (25 ℃, g/cm3): 1.0

PH value (0.1% aqueous solution): 11-12

Active ingredient content (%): 10

Solvent (%): 90

Surface tension (25 ℃, 0.1% aqueous solution, dyne/cm):<19

Solubility: soluble in water and polar organic solvent

Functions and applications

This product is based on non-ionic fluorocarbon surfactant. It can greatly reduce the surface tension of liquid and provide excellent wetting and leveling performance. It is especially suitable for the wetting of the substrate surface with low surface tension, and has excellent anti shrinkage ability for the polluted substrate surface. It is widely used in latex paint, wood paint, metal anti-corrosion paint and plastic paint. This product does not contain APEO.

This article is provided by leveling agent expert YCK http://www.yck-chemical.com